Precision Digital ProtEX-MAX Level Meter, PD8-6001

Images are representations only.

PD8-6001-7H7

Series: PD8-6001 ProtEX-MAX Explosion-Proof Feet & Inches Level Meter Brand: Precision Digital Corporation

PD8-6001-7H7

Price

$1,826.00 CAD

Stock

50+ In Stock

Quantity

Request Information

Product Type: Explosion-Proof Feet & Inches Level Meter
Inputs: Current (4-20 mA), Voltage (0-10 V)
Outputs: 4 Relays & 4-20 mA Output
Power: 12-24 VDC/VAC
Transmitter Power: 24 VDC @ 25 mA + 24 VDC @ 25 mA
Display: SunBright, 0.6", Dual Line, 6 Digits, F & I, Red LED
Approvals: ATEX (FP), CE, CSA (XP), FM (XP), IEC (FP)
Warranty: 3 years

Specifications

Brand

Precision Digital Corporation

Approvals & Certifications

ATEX II 2 GD Ex d IIC T* Gb Ex Tb IIIC T90° C Db IP68 Ta = -40° C to °C *T6 = -40° to 60° C *T5 = -40° to 65° C, Certificate Number: Sira 12-ATEX-1182
CSA Class I, Div. 1, Groups B, C, D, Class II, Div. 1, Groups E, F, G Class III, Div. 1, Class I, Zone 1 Ex d IIC Zone 21 Ex Tb IIIC T90° C -40° C < Tamb. < +60° C, Temperature Code T6 -40° C < Tamb. < 65° C, Temperature Code T5 Enclosure Typica
FM Class I, Div. 1, Groups B, C, D Class II, Div. 1, Groups E, F, G Class III, Div. 1, T5/T6 Class I, Zone 1, AEx d, IIC Gb T5/T6 Zone 21, AEx Tb IIIC T90° C, Ta -40° to 65° C T6 Ta = -40° to 60° C, T5 Ta = -40° to 65° C, Certificate Number: 3
IEC Ex d IIC T* Gb Ex Tb IIIC T90° C Db IP68 Ta = -40° C to * °C *T6 = -40° C to 60° C *T5 = -40° to 65° C, Certificate Number: IECEx SIR 12.0073

Environmental Protection

IP66
IP68
NEMA 4X
NEMA 7
NEMA 9

Display

Upper feet & inches display: 0.60” (15 mm) high with feet & inches Designations. Lower display: 0.46” (12 mm) high. Both are 6 Digits (-99999 to 999999), Red LEDs

Feet & Inches Display Range

0” 00” 0/16” to 99” 11” 15/16”

Display Intensity

Eight intensity levels

Display Update Rate

5/second (200 ms)

Overrange

Display flashes 999999

Underrange

Display flashes -99999

Display Assignment

The upper and Lower displays may be assigned to PV1, PV2, PCT (Percent), max/min, alternate max. & min, Set Points, units (Lower display only), or Modbus Input.

Front Panel

NEMA 4X, IP65

Programming Methods

Four through-glass SafeTouch buttons, four mechanical buttons behind glass, digital inputs, PC and MeterView Pro Software, or Modbus registers.

F4 Digital Input Contacts

3.3 Vdc on Contact. Connect Normally Open Contacts across F4 to COM

F4 Digital Input Logic Levels

Logic High: 3 to 5 Vdc

Logic Low

0 to 1.25 Vdc

Noise Filter

Programmable from 2 to 199 (0 will disable filter)

Filter Bypass

Programmable from 0.1 to 99.9 % of Calibrated Span

Recalibration

Calibrated at the factory. Recalibration is recommended at Least every 12 months.

Maximum / Minimum Display

Maximum/minimum readings reached by the process are stored until reset by the user or until power to the meter is turned off.

Password

Three Programmable passwords restrict modification of programmed settings.

Non-Volatile Memory

All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost.

Input Power Options

85-265 Vac 50/60 Hz, 90-265 Vdc, 20 W max, or optional model with 12-24 Vdc ± 10 %, 15 W Max.

Fuse

Required External Fuse: UL Recognized, 5 A max., Slow Blow, up to 6 metres may share one 5 A fuse.

Isolated Transmitter Power Supply

Terminals P+ & P-: 24 Vdc ± 10 %. Isolated from the Input at > 500 V. Jumper selectable for 24, 10, or 5 Vdc Supply (Internal jumper J4). All models transmitter Supply rated @ 25 mA Max.

Normal Mode Rejection

Greater than 60 dB at 50/60 Hz

Isolation

4 kV Input/Output-to-Power Line, 500 V Input-to-Output or Output-to-P+ Supply

Overvoltage Category

Installation Overvoltage Category II: Local level with smaller transient overvoltages than Installation Overvoltage Category III.

Environmental

T6 Class Operating Temperature Range Ta = -40 to 60° C
T5 Class Operating Temperature Range Ta = -40 to 65° C

Maximum Power Dissipation

Maximum Power dissipation limited to 15.1 W. See PD8 instruction manual for additional details.

Connections

Removable Screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external Relays, Digital I/O, and Serial communication Adapters

Enclosure

1/8 DIN, High Impact Plastic, UL 94V-0, color: Black

Mounting

1/8 DIN Panel cutout required: 3.622” x 1.772” (92 mm x 45 mm). Two panel mounting bracket assemblies are provided

Tightening Torque

Screw terminal Connectors: 5 lb-in (0.56 Nm)

Dimensions

4.68” x 2.45” x 5.64” (119 mm x 62 mm x 143 mm) (W x H x D)

Weight

9.5 oz. (269 g)

UL File Number

UL & C-UL Listed. E160849, 508 Industrial Control Equipment.

Warranty

3 Years Parts&labor

USB Connection

Compatibility: USB 2.0 Standard, Compliant
Connector Type: Micro-B receptacle
Cable: USB A Male to Micro-B Cable
Driver: Windows® 98/SE, ME, 2000, Server 2003/2008, XP 32/64-Bit, Vista 32/64-Bit, Windows 7 32/64-Bit, Windows 10 32/64-Bit
Power: USB Port

Documentation

Certifications

Datasheets

PD8-6001-7H7

SKU Details

Product Series Specifications

Specifications

Brand

Approvals & Certifications

Environmental Protection

Display

Feet & Inches Display Range

Display Intensity

Display Update Rate

Overrange

Underrange

Display Assignment

Front Panel

Programming Methods

F4 Digital Input Contacts

F4 Digital Input Logic Levels

Logic Low

Noise Filter

Filter Bypass

Recalibration

Maximum / Minimum Display

Password

Non-Volatile Memory

Input Power Options

Fuse

Isolated Transmitter Power Supply

Normal Mode Rejection

Isolation

Overvoltage Category

Environmental

Maximum Power Dissipation

Connections

Enclosure

Mounting

Tightening Torque

Dimensions

Weight

UL File Number

Warranty

USB Connection

Product Series Documentation

Documentation

Certifications

Datasheets

Instruction Manuals

Modbus Tables

Similar SKUs