Dwyer Electro-Pneumatic Transducer, Series EPTA
Images are representations only.

EPTA-B0

Series: Series EPTA Electro-Pneumatic Transducer Brand: Dwyer Instruments, LLC

DWYER Electro-Pneumatic Transducer, Metal Bracket Mount.

Price
$1,552.00 CAD
Stock
50+ In Stock
Request Information

Dwyer Electro-Pneumatic Transducer, Series EPTA
  • Transducer Type - Standard Metal Bracket Mount Transducer

Specifications

Brand

Accessories

  • DIN Mounting Kit

Accuracy

  • ± 1.0 % of Full Scale at Room Temprerature
  • ± 2.0 % of Full Scale at 0° to 48.8° C (32° to 120° F)

Electrical Connectors

  • One 14 AWG Per Terminal
  • Plug-In Block Terminal Typical with 5 mm Pin Spacing

Flow Capacity

  • 750 SCIM (1,274.25 m³/hour)

Humidity

  • 5 to 95 % - Non-Condensing

Input Impedance

  • 250 ohms - Current

Input Signal

  • 0-10 Vdc
  • 0 to 15 Vdc
  • 0-5 Vdc
  • 4-20 mA DC Current

Media

  • Any Inert Gas
  • Clean Dry Air

Operating Temperature

  • 0° to 49° C (32° to 120° F)

Output

  • 0-5 Vdc
  • psig: 0 to 20 (kPa: 0 to 138, bar: 0 to 1.36)

Pressure Range

  • bar: 0 to 1.36
  • kPa: 0 to 137
  • psig: 0 to 20

Sensor / Probe Diameter

  • 1/4” O.D. - Pressure Connections (Polyethylene Tubing Optimum)

Storage Temperature

  • -6.7° to 65.6° C (-20° to 150° F)

Supply Pressure - Maximum

  • psig: 25 (kPa: 172, bar: 1.72)

Supply Voltage

  • 24 Vac ± 10 % 50/60 Hz
  • 24 Vdc ± 10 %

Tube Connection

  • 1/4” Tube

Documentation

Catalogs

Manuals

View Product Series

Similar SKUs

A-386
A-386
Fittings, Filters & Mufflers
Dwyer Instruments
$991.00 CAD
25+ In Stock
DWYER 5/16" Metal Hole Plugs, 20/Bag.
A-288
A-288
Mounting Options
Dwyer Instruments
$1,737.00 CAD
50+ In Stock
DWYER “L” Type Metal Mounting Bracket with Screws.
A-299
A-299
Mounting Options
Dwyer Instruments
$1,639.00 CAD
25+ In Stock
DWYER Mounting Bracket Flush Mount Magnehelic® Gage in Bracket. Bracket is then Surface Mounted . Steel with Gray Hammertone Epoxy Finish. 6.3" x 7.7" x 4.0", 1.30 Lb.
A-370
A-370
Mounting Options
Dwyer Instruments
$837.00 CAD
100+ In Stock
DWYER Flush Mount Bracket Used With: Photohelic® 3000MR/MRS, Capsuhelic®, 631B Transmitter. Bracket is then Surface Mounted. Steel with Gray Hammertone Epoxy Finish.
A-289
A-289
Mounting Options
Dwyer Instruments
$1,665.00 CAD
50+ In Stock
DWYER “S” Type Metal Mounting Bracket with Screws.
EPTA-S1
EPTA-S1
Series EPTA Electro-Pneumatic Transducer
Dwyer Instruments
$1,436.00 CAD
50+ In Stock
DWYER Electro-Pneumatic Transducer, Standard Snap-track Mount with Fail-Safe.
EPTA-B1
EPTA-B1
Series EPTA Electro-Pneumatic Transducer
Dwyer Instruments
$2,480.00 CAD
16 In Stock
DWYER Electro-Pneumatic Transducer, Metal Bracket Mount with Fail-Safe.
EPTA-S0
EPTA-S0
Series EPTA Electro-Pneumatic Transducer
Dwyer Instruments
$125.00 CAD
100+ In Stock
DWYER Electro-Pneumatic Transducer, Standard Snap-track Mount.
show more