Precision Digital Helios Batch Controller, PD2-6210/6310
Images are representations only.

PD2-6210-7H2

Series: PD2-6210 Helios Analog Input Batch Controller Brand: Precision Digital Corporation

PD2-6210-7H2

Price
$2,300.00 CAD
Stock
50+ In Stock
Request Information

  • Product Type: Large Display NEMA 4X Batch Controller
  • Inputs: Current (4-20 mA), Voltage (0-10 V)
  • Outputs: 2 Relays
  • Power: 12-24 VDC/VAC
  • Transmitter Power: 24 VDC @ 200 mA
  • Display: SunBright, 1.8", Dual Line, 6 Digits, Red LED
  • Serial Communications: RS-485 Modbus
  • Approvals: UL/C-UL
  • Warranty: 3 years

Specifications

Brand

Display

  • Two lines with 1.8” (46 mm) High Digits, Red LEDs, 6 Digits per line (-99999 to 999999), with Lead Zero Blanking

Default Display Assignment

  • The upper display shows batch total. The Lower display shows rate with alternating units, and can be switched to show grand total, batch count, or preset with the STOP key.

Custom Display Assignment

  • The upper and Lower displays may be assigned to rate, total, grand total, batch count, preset, Set Points, units (Lower display only), alternating R & T, R & GT, preset & rate, max. & min, or a Modbus display register. Any rate/total/grand total display may be Programmed to alternate with a custom unit or tag.

Alternating Display

  • Displays alternate every 10 seconds when display is selected or the batch is paused.

Display Intensity

  • Eight user selectable intensity levels

Display Update Rate

  • 5/second (200 ms)

Overrange

  • Display flashes 999999

Underrange

  • Display flashes -99999

Operating Methods

  • Three Programmable Front Panel Buttons (Default START, BATCH, STOP), digital inputs, PC and MeterView Pro Software, and Modbus registers

Programming Methods

  • Four SafeTouch through-glass buttons when cover is installed. Four internal pushbuttons when cover is removed.

F4 Digital Input Contacts

  • 3.3 Vdc on Contact. Connect Normally Open Contacts across F4 to COM

F4 Digital Input Logic Levels

  • Logic High: 3 to 5 Vdc
  • Logic Low: 0 to 1.25 Vdc

Noise Filter

  • Programmable from 2 to 199 (0 will disable filter)

Filter Bypass

  • Programmable from 0.1 to 99.9 % of Calibrated Span

Recalibration

  • Recommended at Least every 12 months

Maximum / Minimum Display

  • Maximum (Peak) / min (Valley) Readings Reached by the process are stored until reset by the user or until Power is cycled

Password

  • Three Programmable passwords restrict modification of programmed settings and two prevent resetting the totals

Non-Volatile Memory

  • All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost

Power Options

  • Powered over USB for configuration only
  • 12-24 Vdc ± 10 %, 15 W max
  • 85-265 Vac 50/60 Hz, 90-265 Vdc, 20 W max

Isolated Transmitter Power Supply

  • Terminals P+ & P-: 24 Vdc ± 10 %. 12-24 Vdc Powered models selectable for 24, 10, or 5 Vdc Supply (Internal P+/P- switch). 85-265 Vac models rated @ 200 mA max., 12-24 Vdc Powered models rated @ 100 mA max., @ 50 mA max. for 5 or 10 Vdc Supply

Fuse

  • Required External Fuse: UL Recognized, 5 A max., Slow Blow, up to 6 Controllers may share one 5 A fuse

Normal Rejection Mode

  • Greater than 60 dB at 50/60 Hz

Isolation

  • 4 kV Input/Output-to-Power Line, 500 V Input-to-Output or Output-to-P+ Supply

Overvoltage Category

  • Installation Overvoltage Category II: Local level with smaller transient overvoltages than Installation Overvoltage Category III.

Environmental

  • T6 Class Operating Temperature Range Ta = -40 to 60° C
  • T5 Class Operating Temperature Range Ta = -40 to 65° C

Maximum Power Dissipation

  • Maximum Power dissipation limited to 15.1 W

Connections

  • Removable Screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external Relays, Digital I/O, and Serial communication Adapters

Enclosure

  • UL Type 4X, IP65 rated. Polycarbonate & glass blended plastic Case, color: gray. Includes four PG11 through-hole conduit openings, with two factory installed PG11, IP68, Black nylon threaded hole plugs with backing nuts

Wall Mounting

  • Four (4) Mounting holes provided for Mounting meter to wall. Pipe Mounting: Optional Pipe Mounting Kit (PDA6260) Allows for Pipe Mounting. Sold Separately

Dimensions

  • 10.63” x 12.59” x 4.77” (270 mm x 319.7 mm x 121.2 mm) (H x W x D)

Weight

  • 6.10 lbs (2.76 kg)

UL File Number

  • UL & C-UL Listed. E160849, 508 Industrial Control Equipment.

Warranty

  • 3 Years Parts & Labor

USB Connection

  • Compatibility: USB 2.0 Standard, Compliant
  • Connector Type: Micro-B receptacle
  • Cable: USB A Male to Micro-B Cable
  • Driver: Windows® 98/SE, ME, 2000, Server 2003/2008, XP 32/64-Bit, Vista 32/64-Bit, Windows 7 32/64-Bit, Windows 10 32/64-Bit
  • Power: USB Port

Documentation

Datasheets

Instruction Manuals

Modbus Tables

View Product Series

Similar SKUs

PD2-6210-6H2
PD2-6210-6H2
PD2-6210 Helios Analog Input Batch Controller
Precision Digital
$1,121.00 CAD
100+ In Stock
PD2-6210-6H2
PD2-6210-6H7
PD2-6210-6H7
PD2-6210 Helios Analog Input Batch Controller
Precision Digital
$1,099.00 CAD
50+ In Stock
PD2-6210-6H7
PD2-6210-7H7
PD2-6210-7H7
PD2-6210 Helios Analog Input Batch Controller
Precision Digital
$820.00 CAD
18 In Stock
PD2-6210-7H7
PD2-7000-7H7
PD2-7000-7H7
Helios PD2-7000 Temperature Meter
Precision Digital
$2,499.00 CAD
50+ In Stock
PD2-7000-7H7
PD2-6310-6H2
PD2-6310-6H2
PD2-6310 Helios Pulse Input Batch Controller
Precision Digital
$332.00 CAD
50+ In Stock
PD2-6310-6H2
PD2-6310-6H7
PD2-6310-6H7
PD2-6310 Helios Pulse Input Batch Controller
Precision Digital
$903.00 CAD
50+ In Stock
PD2-6310-6H7
PD2-6310-7H2
PD2-6310-7H2
PD2-6310 Helios Pulse Input Batch Controller
Precision Digital
$922.00 CAD
50+ In Stock
PD2-6310-7H2
PD2-6310-7H7
PD2-6310-7H7
PD2-6310 Helios Pulse Input Batch Controller
Precision Digital
$1,309.00 CAD
25+ In Stock
PD2-6310-7H7
show more