Hoffer Turbine Flowmeter, Premier Gas Series
Images are representations only.

Premier Gas Series Turbine Flowmeter

Brand: Hoffer Flow Controls
Request Information
Favorite

The Hoffer Premier Gas Series turbine flowmeters provide extremely accurate gas measurement and at a cost less than typical mass or ultrasonic flowmeters. 

Combine these benefits and high reliability and you’ve got something to think about.
Features
  • Exceptionally wide flow turndown ranges
  • Multiple rotor assemblies available with varying blade angles in each meter size to optimize meter performance for the flow range
  • Multiple coil outputs for signal redundancy, direction detection and meter diagnostics
  • NIST traceable gas calibrations with uncertainties to +0.25% available
  • Self-lubricating, ceramic hybrid ball bearings require no external lubrication or maintenance
  • CE, CSA, Cenelec and various other approvals available on most versions of the Premier Gas meter
  • Meter design does not require seals or o-rings, no through holes in housing
  • Significantly lower pressure drop compared to conventional "turbo" flowmeters
  • Over 100,000 installations worldwide
  • Limited number of internal parts reduce friction, increasing accuracy and repeatability, while limiting replacement/wearing parts
  • Can be installed in either a horizontal (preferred) or vertical orientation

Specifications

Brand

Approvals & Certifications

  • CE
  • CENELEC
  • CSA

Bearing Material

  • Self-Lubricated, Ceramic Hybrid Ball Bearing

Enclosure, Body Material

  • 316 Stainless Steel

Flange Material

  • 316 Stainless Steel
  • Carbon Steel

Flange Size - 10” (DN 250)

  • 10” (DN 250) - 150#
  • 10” (DN 250) - 1500#
  • 10” (DN 250) - 2500#
  • 10” (DN 250) - 300#
  • 10” (DN 250) - 600#
  • 10” (DN 250) - 900#

Flange Size - 12” (DN 300)

  • 12” (DN 300) - 150#
  • 12” (DN 300) - 1500#
  • 12” (DN 300) - 2500#
  • 12” (DN 300) - 300#
  • 12” (DN 300) - 600#
  • 12” (DN 300) - 900#

Flange Size - 2-1/2” (DN 65)

  • 2-1/2” (DN 65) - 150#
  • 2-1/2” (DN 65) - 1500#
  • 2-1/2” (DN 65) - 2500#
  • 2-1/2” (DN 65) - 300#
  • 2-1/2” (DN 65) - 600#
  • 2-1/2” (DN 65) - 900#

Flange Size - 2” (DN 50)

  • 2” (DN 50) - 150#
  • 2” (DN 50) - 1500#
  • 2” (DN 50) - 2500#
  • 2” (DN 50) - 300#
  • 2” (DN 50) - 600#
  • 2” (DN 50) - 900#

Flange Size - 3” (DN 80)

  • 3” (DN 80) - 150#
  • 3” (DN 80) - 1500#
  • 3” (DN 80) - 2500#
  • 3” (DN 80) - 300#
  • 3” (DN 80) - 600#
  • 3” (DN 80) - 900#

Flange Size - 4” (DN 100)

  • 4” (DN 100) - 150#
  • 4” (DN 100) - 1500#
  • 4” (DN 100) - 2500#
  • 4” (DN 100) - 300#
  • 4” (DN 100) - 600#
  • 4” (DN 100) - 900#

Flange Size - 5” (DN 125)

  • 5” (DN 125) - 150#
  • 5” (DN 125) - 1500#
  • 5” (DN 125) - 2500#
  • 5” (DN 125) - 300#
  • 5” (DN 125) - 600#
  • 5” (DN 125) - 900#

Flange Size - 6” (DN 150)

  • 6” (DN 150) - 150#
  • 6” (DN 150) - 1500#
  • 6” (DN 150) - 2500#
  • 6” (DN 150) - 300#
  • 6” (DN 150) - 600#
  • 6” (DN 150) - 900#

Flange Size - 8” (DN 200)

  • 8” (DN 200) - 150#
  • 8” (DN 200) - 1500#
  • 8” (DN 200) - 2500#
  • 8” (DN 200) - 300#
  • 8” (DN 200) - 600#
  • 8” (DN 200) - 900#

NACE & NIST

  • NIST

NPT Connection

  • 1” NPT Male
  • 1/2” NPT Male
  • 1/4” NPT Male
  • 1-1/2” NPT Male
  • 1-1/4” NPT Male
  • 3/4” NPT Male
  • 3/8” NPT Male
  • 5/8” NPT Male

Documentation

Data Sheets

show more