Images are representations only.
PSL 5.0 Hybrid Pump Station Level Controller
Brand: Pulsar Measurement
The PSL 5.0 Pump and Lift Station Level Controller is an ultrasonic level sensor that mounts above the liquid surface for accurate and reliable non-contacting level measurement.
The PSL 5.0 is ideal for sewage pump stations, lift stations, wet wells, and tank level measurements.
The unit includes six independently programmable control relays for pump or valve control, level alarms, dialers, temperature alarm, and echo loss alarms.
The easy-to-use simple menu system and built-in keypad can be used to program application parameters such as measurement ranges, relay set points, and pump alternation sequences.
The PSL 5.0 also includes the ability to connect a submersible pressure sensor, or any other 4-20 mA level sensor, for fail-safe hybrid sensing.
Perfect for wastewater control, sump control, wet well level monitoring, and industrial applications where backup measurement sensors are required.
Features- Low Cost
- Isolated 4-20 mA Output (1,000 ohm)
- Large LCD Display
- Programmable Signal Relay
- Non-Contacting Ultrasonic Sensor or Optional Pressure Sensor
- Built-in 2-Key Calibrator
- Watertight, Dust-tight Enclosure
Specifications
Brand
Electronics Enclosure
- NEMA 4X (IP66) Polycarbonate with Clear, Shatterproof Cover
Accuracy
- ± 0.25 % of Range or 2 mm (0.08 in), whichever is greater
Display
- White, Backlit Matrix - Displays Calibration Menu, Relay Status, Runtime Reports, and Sensor Status
Calibration
- Level or Range Mode in Selectable Units
Programming
- Built-In 5-Button Keypad, Password Protected
Power Input
- 100-240 Vac 50/60 Hz, 2.4-5.6 W Depending on Options
Outputs
- Isolated 4-20 mA, 1,000 ohm
Control Relays
- 6 Form 'C' Dry Contact Relays Rated 5 A SPDT, Programmable Level Alarm and/or Pump Control Modes, Pump Alternation/Sequencing, Failsafe/Echo-Loss, Air Temperature Alarm
Surge Protection
- AC Power, 4-20 mA, and Ultrasonic Sensor
Operating Temperature
- Sensor: -40° to 65° C (-40° to 150° F)
- Electronics: -20° to 60° C (-5° to 140° F)
Certifications & Approvals
- FM/CSA
- CE
- CSA/UL
Maximum Range
- 10 m (32 ft) Optional Sensors for Longer Ranges
Exposed Material
- PVC
- Wastewater Control
- Sump Control
- Wet Well Level Monitoring
- Industrial Applications where Backup Measurement Sensors Are Required
