BXS 3/2 Pilot-Operated Direct-Acting Solenoid Valve

Brand: Bifold - by Rotork

Specifications
  • SIL 3 capability: The product has met manufacturer design process requirements of safety Integrity Level (SIL) 3.
  • Force balanced valve design with high safety factors to de-energize at all pressures in normally open and normally closed configurations.
  • 100% computerized diagnostic testing to ensure each solenoid valve is proven along with confirmed safety factors.
  • Bifold has state of the art product qualification and production equipment including flow (Cv), environment (-70° to 180° C), function and leakage testing and data logging.
  • The standard solenoid operator is a holding magnet type which ensures the valve will operate in damp conditions. The risk of corrosion to internal components is reduced, unlike other valve types that incorporate a solenoid core tube design with a 'wetted' armature that will only operate in dry air conditions!
  • Tolerant to moist air in control lines.
  • The standard solenoid valve has proven arctic service and low temperature performance.
  • Products are manufactured, inspected, assembled and tested in our state of the art production facilities.
  • Large clearances, metal back up to seals and no knife edge sealing to prevent long term valve sticking.
  • Dry solenoid armature to prevent corrosion and affecting safe shut down.
  • Simple maintenance - Removable transient suppression diode on Ex d DC solenoid valve assemblies and removable solenoid coil without removing valve from the tubing.

Specifications

Actuator Type

  • Spring Return

Ambient Temperature Range

  • -60° to 95° C (-76° to 203° F)

Approvals & Certifications

  • Leak Test
  • ATEX II 1 GD, Ex ia IIC T4/T6 Ga
  • ATEX II 2 GD, Ex d IIC T4/T5/T6
  • ATEX II 2 GDc, Ex Emb IIC T4 to T3 Gb
  • CSA
  • GOST
  • IEC 60529
  • IEC Ex Emb IIC T4 to T3 Gb, Ex d IIC T4/T5/T6, Ex ia IIC T4/T6 Ga
  • INMETRO
  • NEPSI
  • SIL 3

BSP Connection

  • 1/4” BSPP Female

Cable Entry

  • 1/2” NPT
  • M20 x 1.5

Class

  • Class H - Solenoid Insulation

Current

  • 45 mA Min. - Solenoid Coil

Duty Cycle

  • 100 % Duty Cycle Continuous Rating/Energised

Electrical Contacts

  • Normally Closed
  • Normally Open

Electrical Protection

  • Short Circuit Current 1,500 A (Typical 74AT4)

Enclosure, Body Material

  • 316L Stainless Steel - Solenoid & Valve
  • Aluminum

Environmental Protection

  • IP66
  • IP67
  • NEMA 4X

Flow Rate

  • 0.73 Cv

Materials of Construction

  • Metric A4 18/10 Grade Stainless Steel (Equivalent to 316L Grade Stainless Steel) - Fasteners

Media

  • Filtered Lubricated or Unlubricated Air
  • Inert Gas
  • Mineral Oil
  • Sweet (Natural) & Sour Gas
  • Water
  • Water Glycol Mixtures

Mounting Position

  • Any Orientation

NPT Connection

  • 1/4” NPT Female

O-Ring Material

  • Fluorosilicone
  • Nitrile
  • Viton

Override

  • Auto Reset
  • Latch Energised
  • Manual Override - Spring Return & Stayput
  • Manual Reset
  • Tamper-proof Manual Latch

Power

  • 1.8 W - Ex d
  • 3 W
  • 3.6 W - Ex Emb

Pressure Range

  • bar: 0 to 10
  • kPa: 0 to 1,000
  • psig: 0 to 145

Process Temperature

  • -55° to 130° C (-67° to 266° F)

Resistance

  • 260 ohms

Response Time

  • < 100 milliseconds - Pull-In
  • < 70 milliseconds - Drop Out

Rotation

  • 360°

Seat / Seal Material

  • Seal: Viton

Spring Material

  • 302S26 Stainless Steel
  • 316S42 Stainless Steel

Supply Pressure

  • psi: 0 to 508 (kPa: 0 to 3,503, bar: 0 to 35)

Supply Voltage

  • 110 Vac, 50/60 Hz
  • 12-110 Vdc
  • 240 Vac, 50/60 Hz

Temperature Range

  • -20° C (-4° F) to Upper Limit of Solenoid Classification
  • Arctic Service Option to -60° C (-76° F)

show more