Images are representations only.
HO Liquid Turbine Hose Series Barbed Hose & Beaded Hose Flowmeter
Brand: Hoffer Flow ControlsThe Hoffer Hose Series “barbed hose and beaded hose” turbine flowmeters provide extremely accurate flow rate measurement and dependable service for use on liquid applications where the meter must be fitted to hose or connected to plastic tubing.
Barbed hose end connections should be selected for permanent installation when the flowmeter is intended to stay once installed.
Beaded hose end connections are meant for test installations or applications which are expected to be moved around from time to time.
The hose on a beaded end can be readily removed and reinstalled.
Features- Ideal for use in liquid applications where flowmeter will be installed and fitted to hose or plastic tubing
- Sizes 1/4" through 3" available (other sizes available, contact factory)
- Pressure dependent on the hose pressure rating up to psig: 1,000 (kPa: 6,895, bar: 68.95)
- Barbed and beaded hose end connections for permanent applications and applications where installation may be moved from time to time
- Multiple pickup coils available
Specifications
Brand
Approvals & Certifications
- ATEX: EX II 2 GD Ex d TD IIC, IP66/68
- CE
- CSA: Class I, Div. 1, Groups A, B, C, D, Class II, Div. 1, Groups E, F, G, Class III, Type 4X EX D IIC, Class I, Zone 1, IP66
- FM: Class I, Div. 1, Groups A, B, C, D, Class II/III, Div. 1, Groups E, F, G, Type 4X
- IEC EX D IIC IP68
- PED
Bearing Material
- 440C Stainless Steel
- Ceramic Hybrid Ball Bearings
- Tungsten Carbide
Enclosure, Body Material
- 316 Stainless Steel
Environmental Protection
- IP66
- IP68
Hose Connection
- 1” I.D. Hose (Bead or Barb)
- 1/2” I.D. Hose (Bead or Barb)
- 1-1/2” I.D. Hose (Bead or Barb)
- 1-1/4” I.D. Hose (Bead or Barb)
- 2” I.D. Hose (Bead or Barb)
- 2-1/2” I.D. Hose (Bead or Barb)
- 3” I.D. Hose (Bead or Barb)
- 3/4” I.D. Hose (Bead or Barb)
- 4” I.D. Hose (Bead or Barb)
- 5/8” I.D. Hose (Bead or Barb)
Size
- Turbine Size: 1/4” to 3”
