Krohne Signal Converter for Electromagnetic Flowmeter, IFC 050
Images are representations only.

IFC 050 Signal Converter for Electromagnetic Flowmeter

Brand: Krohne
Request Information
Favorite

Krohne Signal Converter for Electromagnetic Flowmeter, IFC 050
The electromagnetic signal converter IFC 050 is a perfect choice for measuring volumetric flow in various kinds of applications in the water industry but also in the food and beverage business. 

The signal converter can be combined with the flow sensors OPTIFLUX 1000, 2000, 4000, 6000 and the WATERFLUX 3000. 

The output represents measured values for flow, mass and conductivity.
Features
  • An active pulse output for a simple system, like driving an electro-mechanical counter
  • RS485 Modbus communication with a data processing system
  • Extra insulation of the electronic device and housing for high performance in areas with extreme humidity and chances for flooding
  • Cost-effective flow measurement for a wide range of process conditions and still a very acceptable degree of accuracy

Specifications

Brand

Accuracy

  • Option: ± 0.25 % of the Measured Value ± 1.5 mm/sec, Max.
  • Standard: ± 0.5 % of Measured Value ± 1 mm/sec, Max.

Applications

  • Agriculture
  • Air Conditioning Systems
  • CIP- Systems
  • Food & Beverage
  • Heating Systems
  • Irrigation Systems
  • Steel Mills
  • Ventilation Systems
  • Water & Wastewater
  • Water Distribution Network, Abstraction

Approvals & Certifications

  • IEC 60068-2-3, IEC 61298-3, IEC 68-2-64

Approvals & Certifications

  • CE - EU Directives
  • NAMUR - NE 21, NE 43, NE 53

Cable Entry

  • 1/2” PF
  • Option: 1/2” NPT
  • Standard: M20 x 1.5 (8 to 12 mm)

Cable Length

  • Signal: 1,950 feet (600 metres) Depending on Electrical Conductivity & Flow Sensor

Cable Type

  • Double-Shielded Cable - Transmission between the Flow Sensor & Signal Converter

Communication

  • Baud Rate: 1,200, 2,400, 3,600, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bit/sec
  • HART
  • Master/Slave
  • Modbus RTU
  • RS-485

Conductivity

  • Electrical Conductivity - Water: ≥ 20 µS/cm
  • Electrical Conductivity: ≥ 5 µS/cm (All Media Except for Water)

Consumption

  • Power: 15 VA
  • Power: 5.6 W

Control Functions Characteristics

  • Status & Control: ON/OFF

Diagnostics

  • Empty Pipe Detection
  • Measuring Device
  • Stabilization

Display

  • 128 x 64 Pixels
  • 2.32” x 1.22” (59 x 31 mm) - Ambient Temperature Below -25° C / -13° F May Affect the Readability of the Display
  • LCD Display, Backlit White

Enclosure Finish

  • Polyester Topcoat

Enclosure, Body Material

  • Aluminum

Environmental Protection

  • IP66
  • IP67
  • NEMA 4
  • NEMA 4X

Flow Rate

  • 0.005 to 48,858 m³/hour
  • 0.3 to 12 m/sec

Frequency

  • Pulse Rate / Frequency: 0.01 to 10,000 Hz

Function

  • Step - the Time Constant Corresponds to the Elapsed Time Until 67 % of the End Value Has Been Reached

Hysteresis

  • 0.1%

Load Resistance

  • Test Point: ≥ 250 ohms at HART

Media

  • Conductive Fluids
  • Liquids

Operating Pressure

  • psi: 0 to 72.52 (kPa: 0 to 500, bar: 0 to 5)

Output

  • ± 10 µA, ± 100 ppm/°C (Typically: ± 30 ppm/°C)
  • With & without HART: 10-21.5 mA, Q=100 %
  • With HART: 4-20 mA, Q=0 %
  • Without HART: 0-20 mA, Q=0 %

Power Supply

  • 100-230 Vac, 50/60 Hz (-15 % / +10 %) Tolerance
  • 24 Vdc (± 30 %) Tolerance
  • 240 Vac - (5 % is Included in the Tolerance Range)

Principle of Operation

  • Faraday's Law of Induction

Repeatability

  • ± 0.1 %

Storage Temperature

  • -40° to 70° C (-40° to 158° F)

Wiring

  • Insulated Wire: 2 x 0.5 mm² Cu / AWG 20

Documentation

show more