Images are representations only.
Series I2-1 Immersion Temperature Probe
Brand: Dwyer Instruments, LLC
The Series I2-1 Immersion Temperature Probes are designed to monitor the hot and chilled water lines throughout a building's water distribution loop.
The multiple temperature sensor outputs allow these sensors to connect to virtually any digital building controller.
The Series IW2 stainless steel thermowells allow the temperature sensors to be replaced without draining the water line.
The temperature sensors are available in 4" and 6" insertion lengths.
Note: A Series IW2 Thermowell must be used on pressurized air and water lines to prevent leakage around the probe.
Features- Direct Wall Mounting
- 6' cable
- 1/2" Internal NPT Accepts Conduit for more Industrial Installation
Displaying prices & availability for Ohio, United States in CAD. Change location.
Models matching criteria: 23
100+ In Stock
$1,063.00 CAD
$10.00 Shipping
50+ In Stock
$1,456.00 CAD
$10.00 Shipping
50+ In Stock
$2,047.00 CAD
$10.00 Shipping
50+ In Stock
$1,093.00 CAD
$10.00 Shipping
50+ In Stock
$620.00 CAD
$10.00 Shipping
50+ In Stock
$1,721.00 CAD
$10.00 Shipping
DWYER 6" SST Thermowell.
50+ In Stock
$1,607.00 CAD
$10.00 Shipping
50+ In Stock
$1,480.00 CAD
$10.00 Shipping
50+ In Stock
$2,386.00 CAD
$10.00 Shipping
50+ In Stock
$1,406.00 CAD
$10.00 Shipping
50+ In Stock
$109.00 CAD
$10.00 Shipping
50+ In Stock
$731.00 CAD
$10.00 Shipping
25+ In Stock
$692.00 CAD
$10.00 Shipping
25+ In Stock
$1,446.00 CAD
$10.00 Shipping
25+ In Stock
$277.00 CAD
$10.00 Shipping
25+ In Stock
$349.00 CAD
$10.00 Shipping
25+ In Stock
$1,405.00 CAD
$10.00 Shipping
25+ In Stock
$2,138.00 CAD
$10.00 Shipping
23 In Stock
$459.00 CAD
$10.00 Shipping
14 In Stock
$2,245.00 CAD
$10.00 Shipping
11 In Stock
$60.00 CAD
$10.00 Shipping
9 In Stock
$313.00 CAD
$10.00 Shipping
8 In Stock
$1,507.00 CAD
$10.00 Shipping
Specifications
Accuracy
- ± 0.1 % @ 32° F (0° C) - Balco RTD
- ± 0.2° C (± 0.36° F) from 0° to 70° C (32 to 158° F) - Thermistors
- ± 0.28° C (± 0.5° F) at 32° F (0° C) - Nickel RTD
- ± 0.6 % at 32° F (0° C) - Platinum RTD
Cable Length
- 6 ft
Insertion 'U' Length
- 4” (10.1 cm)
- 6” (15.2 cm)
Mounting
- 1/2” Threaded Connection to Fit Series IW2 Thermowell
Operating Temperature
- -35.5° to 115.5° C (-32° to 240° F)
Sensor / Probe Diameter
- 1/4” (6.3 mm)
Sensor / Probe Material
- 304 Stainless Steel
Sensor / Probe Type
- RTD - Pt100 ohms, PT1,000 ohms, Ni1,000 ohms, Balco 1,000 ohms
- Thermistor - 10 kiloohms (Typical 2, Typical 3) kiloohms, 5 kiloohms, 100 kiloohms, 20 kiloohms, 2252 ohms
- Hot or Chilled Water Line Monitoring
- HVAC and Building Automation Systems
